Tesla Invader 4X 280W VW Box Mod Kits

Check the Telsa Invader 4X Box Mod Kits, which is the newest member of Telsacig Invader series. the new kit includes the Invader 4X Box Mod and Tesla RDA. the Invader 4X Box Mod made of the PC and ABS material, lightweight and comfortable to hold, with the ergonomically design, feels good in the hand. the Tesla VW mod powered by dual high-rate 18650 batteries and max output 280watts, 5 levels working voltage adjustable from 3V to 8V. the Invader 4X supports the resistance low to 0.08ohm, which allow it can work with the sub ohm tanks or the rebuildable atomizers. there is a micro USB port on the bottom right section, vapers can charge the batteries by connecting to the wall adapter via the micro USB port. the intelligent LED indicator lights will show you the battery life or the charging status. the Invader 4X RDA with the easy to build building deck, the packing box includes the vaping wire and organic cotton, allow vapers to design the DIY pre-made coils and install on the Tesla RDA easily, the airflow holes on the aluminum alloy tube, you can adjust the airflow to your preference easily. will bring you the large cloud of vapor and DIY vaping fun.

Invader 4X VW Box Mod Features:

• Material: PC+ABS
• Size: 88*52*26mm
• Colors: Black, Blue, White, Red
• 280W Max Output Wattage
• Powered By Dual High-Rate 18650 Batteries(Sold Separately)
• I-V Levels Working Voltage Adjustable
• Working Voltage Range: 3-8V
• Max Output Current: 53A
• Input Voltage: 6.4-8.4V
• 5V/1.5A USB Charging
• Intelligent LED Light Indicator
• Over Puffs Protection
• Reverse Connection Protection
• Atomizer Short-Circuit Protection
• Low Voltage Protection
• Overheat Protection
• Over Current Protection

Invader 4X RDA Features:

• Material: Stainless Steel + Resin
• Size: 34*25mm
• Resin Wide Bore Drip Tip Included
• 25MM Diameter
• Easy To Build
• Bottom Airflow Adjustable System
• 1.5*3.0MM Post Holes

Includes:

1*Invader 4X Box Mod

1*Invader 4X RDA

2*Vaping Wires

3*Silicone Rings

1*Wrench

4*Screws

1*Organic Cotton

1*Data Cable A

2*User Manuals

Note: please ensure you have basic knowledge on how to properly to use it.

1)If the tanks use sub ohm coils, vapers must be sure that your device and batteries can handle sub ohm coils, only recommend experienced users order this, extra safety precautions should be practiced when using a sub ohm tank. the tank only works with the mod that can support the atomizer and coil. if you have a tank and resistance is 0.3ohm, you must sure that the mod or battery can support resistance low to 0.3ohm. improper use and lead to injury or damage.use the OHMS LAW Calculator to check.if you have a question, please feel free to contact us.

2)if the coils are sub ohm coils, the user should be sure that the tank and mods can handle the sub ohm resistance coils, please make sure you have the great understanding of them, if you are not sure, please do not order and use, welcome contact us any time to get help.

3)users need to pay attention to Li-ion cells when vaping. the batteries very sensitive to charging characteristics and may explode or burn if mishandled. so vapers must have enough knowledge of Li-ion batteries in charging, discharging and assembly before use. please use the fire-proof surface battery charger, never leave a charging battery unattended. we will not responsible for damage for the human reason or mishandling of Li-ion batteries and chargers. the device always recommends work with rechargeable lithium-ion IMR batteries with min output current 20A or higher.

4) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods etc. please have a basic knowledge of batteries.welcome to contact us anytime to get help.