Smoktech TF-RTA G2 Deck

Features:

Smok G2 deck is dual post velocity style, 16mm big build deck, pre-installed 0.45ohm coil. this new smok e cig deck only work on smoktech TF-RTA tank only.

How to build the RTA:

• 1. clean your hands first.
• 2. take the G2 deck apart.
• 3. install the pre-made coils, insert one end of the coil into the left-side hole and another end into the right side hole.
• 4. positioning and cutting the exceeding ends of wire off, make sure the coil is fixed and lined up with the air hole, also make sure the coil is not touching the deck. then cut the exceeding ends of wire off.
• 5. cut a strip of cotton and make sure it's just larger than the coil.
• 6. inserting the cotton, place it in the middle.
• 7.cutting the wick at an angle and make sure it's not too short and not too long.
• 8.wet the coil with e juice before your fire. 

Package:

1*smoktech TF-RTA G2 deck

Note: please ensure you have basic knowledge on how to properly to use it.

1)if the coils are sub ohm coils, the user should be sure that the tank and mods can handle the sub ohm resistance coils, please make sure you have the great understanding of them, if you are not sure, please do not order and use, welcome contact us any time to get help.

2)Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods etc.please have a basic knowledge of batteries.welcome to contact us anytime to get help.